1. How do you convert mm to in and vice versa?
2. How do you convert a displacement of cc into cu in?
3. What is the oil capacity of the TD42 engine?
4. What is the fuel tank capacity of the Patrol GQ (Ungas edition)?
5. What is the wheelbase of the Patrol GQ in mm and in in?
6. What are the gear ratios of the 5 speed M/T patrol GQ? What is the final drive ratio? What is the ratio of low range ang high range?
7. What is the turning circle of the Patrol GQ?
8. How many turns of the steering wheel does it take to get from full left to full right (lock-to-lock).
9. What are the sizes of the Patrol GQ's disc brakes.
Sorry madaming tanong. I hope you guys can help me. Thanks.
__________________ [Only registered and activated users can see links. ]
1. 1 inch = 25.4mm / 1mm = 0.03937 inch
2. 1cc = 0.61 cu. in. / 1 cu. in. = 16.387cc
3. 10 liters according to Ungas
4. sa GU 95 liters, malamang pareho lang sa GQ
5. 2970mm or 116.93inches
6. di ko alam
7. sa GU 6.1m, malamang pareho din ng GQ
8. di ko pa nabilang
9. di ko alam
Re: HELP: Measurements conversion and Patrol GQ specs
1. in. x 25.4 = mm; mm / 25.4 = in.
2. [Only registered and activated users can see links. ]
3. 10 liters of oil
4. 95 liters of fuel
5. 2970 mm / 116.9 in.
6. 1st 4.556, 2nd 2.625, 3rd 1.518, 4th 1.000, 5th 0.836 Rev. 4.425; For the final drive ratio, body plate indicates 3.333 ratio but the brochure indicates 4.111 don't know which one tells the truth.
7. 6.2 m / 22.0 ft.
8. 7 turns? I'm not sure, will check on this tomorrow.
9. No measurement as of post time.
Hmmm.. bakit kaya biglang nagtanong si OTEP tungkol sa Safari?